Page Collage
ABC Powder

ABC Powder

Usage Instructions

Mixing Instructions

  1. Fill reservoir 3/4 full with water.
  2. Check pH and adjust as required. It is recommended that the pH be one point below desired level before mixing. It is also recommended the pH should be approximately 5.3.
  3. Weigh out the NutriGreen A mix required.
  4. Dissolve NutriGreen A mixture in 1 gallon of warm water (75-80 F).
  5. Mix NutriGreen A thoroughly into nutrient reservoir
  6. Weigh out the NutriGrow B or NutriBloom C mix as required.
  7. For plants in the grow stage use NutriGrow B and for plants in the flower stage use NutriBloom C. In warm water (75-80 F) dissolve desired NutriGrow B or NutriBloom C mixture in 1 gallon container.
  8. Mix thoroughly into nutrient reservoir.
  9. Top up reservoir with clear water to the full mark.
  10. Check pH and adjust accordingly. The recommended pH should be approximately 6.3.
Mixing Ratios g/litre g/4 litre
NutriGreen A
ABC Powder Houseplants, Bonsai, Orchid and Cacti (all) 0.51 2.04
Propagation and Herbs 0.77 3.08
Vegetative/Fruit Growth * 1.75 7
Vegetative/Fruit Flower ** 1.25 5
Drip Irrigation (using 16:1 Hydroponic Injector) 6.15 24.6
Nitrogen (N) 10% Calcium (Ca) 15%
Iron (Fe) 0.03% Chelates (EDTA) 2.50%

 

Mixing Ratios g/litre g/4 litre
NutriGrow B
ABC Powder Houseplants, Bonsai, Orchid and Cacti (all) 0.7 2.8
Propagation and Herbs 1.06 4.24
Vegetable & Fruit Growth* 3.25 13
Drip Irrigation (using 16:1 Hydroponic Injector) 8.43 33.72
Nitrogen (N) 3% Phosphorus (P) 3.50% Potassium (K) 18%
Magnesium (Mg) 3.50% Sulphur (S) 6.50% Chelates 4.50%

 

Mixing Ratios g/litre g/4 litre
NutriBloom C
ABC Powder Houseplants, Bonsai, Orchid and Cacti (all) 0.5 2
Propagation and Herbs 0.7 2.8
Blooming Fruit & Flower ** 3 12
Drip Irrigation (using 16:1 Hydroponic Injector) 8.5 34
Phosphorus (P) 10% Potassium (K) 14% Magnesium (Mg) 4%
Sulphur (S)  5% Chelates (EDTA) 4.50%    

 

Note:

It is important when mixing ABC that each component is mixed separately.

For example, a grow formula the A is mixed then the B is mixed in a separate container. The two are then mixed together to create the final solution.

After the mixing separately, mix components together to form a complete nutrient formula.