CO2 Monitor Controller

Usage Instructions

Mounting Instructions

• The CO2 Monitor/Controller should be placed mid height of expected finished plant height.
• For best results do not mount the CO2 Monitor/Controller near any fresh air supply, doors and open windows or near CO2 generators.
• Vent recepticle plug on unit is primarily to be used so the PPM level of CO2 does not exceed safe levels.
• Be sure to have ample air movement in room, to ensure co2 is evenly dispersed throughout plant room.

Setup Instructions

Please take the time to read this manual before starting to use your Nutrilife CO2 Monitor/Controller.

Step 1 - Press M (menu button) once, arrow ↑ ↓ to adjust CO2 level. Press S (save button). Step one is now complete.

Step 2 - Press M (menu button) twice, arrow ↑ ↓ to adjust CO2 differential. Press S (save button). Step two is now complete.(ex: should read between 100-300PPM)

Step 3 - Press M (menu button) three times, arrow ↑ ↓ to adjust photo cell on/off. press S (save button). Step three is now complete.

Step 4 - Press M (menu button) four times, arrow ↑ ↓ to adjust ventilation levels. Press S (save button). Step four is now complete.

Step 5 - Press M (menu button) five times, arrow ↑ ↓ to adjust ventilation differential. Press S (save button). Step five is now complete. (ex: should read between 100-300PPM)

Note: Once you have decided on the setting that requires adjustment. You have a time delay of one minute to make your selection, otherwise it will return to the preset settings.